Granite Mailbox Post Cost Guide

The price of a granite mailbox post varies by size, finish, and installation requirements. Typical costs are driven by the stone material, base hardware, and labor for mounting and setting the post. Buyers should expect a mix of materials, delivery, and possible permits or setbacks in some regions.

Item Low Average High Notes
Granite Post (roughly 12–18 in tall) $150 $300 $600 Natural or polished finish affects price
Concrete footing and setting $100 $250 $500 Depth and local codes matter
Hardware and post sleeve $25 $75 $150 Includes bolts, brackets, sealant
Labor and installation $150 $350 $700 Depends on crew time and site access
Delivery $30 $120 $250 Distance and terrain influence
Permits or inspections $0 $75 $300 Not always required
Waste disposal / cleanup $0 $25 $100 Material remnants and packaging

Assumptions: region, project scope, and crew availability affect totals.

Overview Of Costs

Granite mailbox post projects typically range between $450 and $1,900 for the full installation. The exact price depends on post height, thickness, edge finish, and the complexity of anchoring. The per unit mindset often shows granite posts priced by piece plus substructure costs. data-formula=”labor_hours × hourly_rate”>

Cost Breakdown

Materials Labor Equipment Permits Delivery/Disposal Warranty Overhead Contingency
$150–$600 $150–$700 $50–$150 $0–$300 $30–$250 $0–$150 $20–$100 $40–$150

Assumptions: region, specs, labor hours.

What Drives Price

Stone selection and finish have a big impact on cost, with polished granite at the higher end vs exposed or rough-cut options at the lower end. Size and weight matter for shipping and footing cost, while installation difficulty and site access influence labor time. SEER and tonnage do not apply here; instead, wall or ground conditions and local code requirements drive variability.

Regional Price Differences

Prices vary by region due to material availability and labor rates. In the Northeast urban markets, expect higher labor and delivery costs than rural areas. The Midwest tends to balance material cost with moderate installation fees, while the West Coast often shows premium charges for specialty finishes and expedited delivery.

Labor & Installation Time

Labor usually accounts for a sizable portion of total cost, typically 30–50% of the project. A straightforward installation may take 2–4 hours for a small post; complex site access or setting a very large post can push to 6–8 hours. The hourly rate for skilled masons generally ranges from $60 to $120 per hour.

Note that a larger or deeper footing, or the need to remove existing concrete, increases both time and cost. Assumptions: crew size, site accessibility, and thickness of footing.

Additional & Hidden Costs

Hidden costs can appear if site work is required, including utility checks, trenching, or damage repair to landscaping. If an existing base needs removal or reconfiguration, expect extra fees. Delivery surcharges may apply for remote locations, and seasonal weather can delay installation, effectively increasing total project time and cost.

Real-World Pricing Examples

Three scenario cards illustrate typical ranges and labor time

  1. Basic setup — Granite post 12 in tall, simple sleeve, minimal footing, standard delivery

    Specs: 12 in post, standard finish, concrete footing 12 in deep, 1 technician

    Labor: 2 hours; Materials: $180; Labor: $180; Equipment: $60; Delivery: $60; Total: $480

  2. Mid-Range setup — 16 in tall, polished edge, deeper footing, standard access

    Specs: 16 in post, polished finish, footing 18 in; Deliveries: 1 joiner crew

    Labor: 4 hours; Materials: $350; Labor: $420; Equipment: $90; Delivery: $120; Total: $980

  3. Premium setup — 18 in tall, heavy granite, custom sleeve, challenging site

    Specs: 18 in post, premium finish, footing 24 in, permits if required

    Labor: 6 hours; Materials: $550; Labor: $720; Equipment: $120; Permits: $250; Delivery: $180; Total: $1,830

Assumptions: region, specs, labor hours.