Crusher Fines Price Guide

Buyers typically pay between a low and high range for crusher fines supplies, with the cost driven by material type, moisture, delivery distance, and local quarry pricing. This guide presents a clear cost picture, including per-ton and per-unit considerations and practical budgeting tips.

Item	Low	Average	High	Notes
Crusher Fines (per ton)	$8	$12	$25	Depends on source, rock type, and moisture content
Delivery (per load or mile)	$40	$150	$500	Distance, access, and loader requirements affect price
Materials Handling & Preparation	$0	$20	$60	Unloading, screening, and grading may incur fees
Installation/Spread (per hour)	$40	$65	$100	Labor and equipment used to spread and compact
Permits & Fees	$0	$20	$200	Typically minor but may apply in some jurisdictions
Contingency	$0	$30	$120	Extra cushion for grade or subgrade issues

Assumptions: region, project size, material grade, and site access vary pricing.

Overview Of Costs

Crusher fines price ranges from roughly $8 to $25 per ton, with typical delivery and handling adding costs that push a project toward $150–$400 per load or more depending on distance. For a 1,000-ton project, budget roughly $8,000–$20,000 including delivery and labor, assuming average grading work and standard moisture. Cost factors include rock hardness, fines gradation, local quarry pricing, moisture content, and access to the job site.

Cost Breakdown

Component	Low	Average	High	Notes	Assumptions
Materials	$8/ton	$12/ton	$25/ton	Crusher fines material grade and rock source	Enter exact tonnage and source
Labor	$40/hr	$65/hr	$100/hr	Crew size and project duration affect wage total	Assume standard crew with wheeled loader
Equipment	$0	$15/ton	$30/ton	Loader and spreading equipment costs	Include fuel and depreciation if owned
Delivery	$40	$150	$500	Distance-based pricing; may include staging fees	Average 20–40 miles
Permits	$0	$20	$200	Local code or grading permit needs	Urban sites more likely to require permits
Contingency	$0	$30	$120	Overages for grading issues or weather	Project risk-based

data-formula=”labor_hours × hourly_rate”> Per-unit pricing includes $/ton and a separate delivery/installation line to show total project impact.

What Drives Price

Material characteristics such as rock type, hardness, and fines gradation influence price. Logistics including distance from quarry, access, and required staging add costs. Assumptions: standard quarry stock, typical site access.

Ways To Save

Shop multiple quotes from nearby suppliers to compare per-ton pricing and delivery fees. Plan for off-peak delivery windows to reduce haul costs. Consider combining hauling with other bulk materials to maximize truckload efficiency. Assumptions: 1,000-ton project, regional suppliers.

Regional Price Differences

Prices for crusher fines can vary by region due to quarry competition and transportation costs. In the Northeast, a tighter market can push per-ton prices toward the higher end, while parts of the Southeast may offer more competitive delivery. The Midwest often sees mid-range pricing with moderate trucking costs. Local market variations may yield +/- 15–25% deltas from national averages.

Labor & Installation Time

Scheduling a crew for spreading and compacting adds to total cost. A typical spread and light compaction task runs 2–6 hours for a modest area, with rates around $40–$100 per hour per crew. Larger sites can require additional equipment and longer hours. Labor, hours & rates are a major driver after material costs.

Real-World Pricing Examples

Three scenario cards illustrate common project scales. Assumptions: region, soil conditions, and access vary by scenario.