Buyers typically pay a wide range for a 60 by 80 foot concrete slab, driven by surface thickness, reinforcement, site access, and permits. The price range for this project type includes materials, labor, and potential disposal or startup costs. This guide presents practical cost estimates to help plan a budget and compare quotes, with explicit cost ranges and per-unit figures.
Assumptions: region, soil conditions, slab thickness, reinforcement type, and access influence final pricing. The figures below reflect typical residential or light commercial slabs installed in the continental United States.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 60×80 slab area | 4,800 sq ft | 4,800 sq ft | 4,800 sq ft | Base measurement for pricing |
| Per sq ft delivered concrete | $4.50 | $7.50 | $12.00 | Plain to reinforced mixes |
| Installed cost per sq ft | $6.00 | $9.00 | $12.50 | Includes pour, flatwork, forms |
| Total project price | $21,600 | $36,000 | $57,600 | Assumes thickness 4 in to 6 in |
| Thickness/strength options | 4 in | 5 in | 6 in | Higher strength increases cost |
| Reinforcement | No reinforcement | Rebar or mesh | Fiber or engineered options | Substantially affects price |
| Permits & inspections | $0 | $800 | $2,000 | Local jurisdiction dependent |
| Preparation & grading | $2,000 | $5,000 | $10,000 | Soil, compaction, subgrade |
| Finishing & curing | $1,000 | $2,500 | $4,000 | Edging, jointing, finishing |
| Site access & hauling | $500 | $2,000 | $5,000 | Delivery and disposal fees |
Overview Of Costs
Project ranges for a 60 by 80 foot concrete slab typically fall in a broad band due to thickness, reinforcement, and site conditions. Assumptions: region, specs, labor hours. A basic 4 inch slab without reinforcing usually sits around 4 to 7 dollars per square foot installed, totaling roughly 20,000 to 34,000 dollars. A reinforced 5 to 6 inch slab with wire mesh or rebar commonly lands in the 7 to 12 dollar per square foot range, equating to about 34,000 to 57,600 dollars. The wide spread reflects local labor markets, access, and material choices.
Per-unit estimates help compare quotes: per square foot installed is the clearest unit, while per cubic yard concrete and per hour labor rates can illuminate component differences. For context, a 4 inch slab is about 1.33 cubic yards of concrete per 100 square feet; for 4,800 square feet that’s roughly 64 cubic yards, which aligns with the per-yard cost figures in many bids. data-formula=”volume_of_slab × concrete_unit_price”>
Cost Breakdown
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (concrete, aggregate, cement, admixtures) | $9,000 | $16,000 | $29,000 | Concrete mix type influences price |
| Labor | $8,000 | $14,000 | $24,000 | Crew size and duration |
| Equipment | $1,000 | $3,000 | $6,000 | Concrete pump, skip, or pump rental |
| Permits | $0 | $800 | $2,000 | Local rules and inspections |
| Site prep & grading | $2,000 | $5,000 | $10,000 | Subgrade work and moisture barriers |
| Finishing & curing | $1,000 | $2,500 | $4,000 | Edging, joints, curing compounds |
| Delivery & disposal | $500 | $2,000 | $5,000 | Hauling away debris |
| Warranties & overhead | $500 | $2,000 | $5,000 | Company guarantees |
What Drives Price
Key pricing variables include slab thickness, reinforcement type, and site conditions. Slab thickness has a strong impact: an extra inch of thickness can add a meaningful amount to both material and labor costs. Reinforcement choice matters: fiber alone is cheaper than welded wire or rebar grids, but may require different finishing; higher strength mixes also cost more. Other drivers include site access, subgrade preparation, and weather-related delays, all of which can push estimates upward or downward.
Regional differences also shape price. Local labor rates, availability of ready-mix trucks, and permit costs vary by market. Contractors might charge a premium for steep slopes, water management need, or unusual site constraints. Weather windows can tighten schedules and influence project duration and final invoices; cooler months may increase curing time and labor costs.
Ways To Save
Plan the project with a clear scope and several bids to identify a fair range. Bundle work when possible, such as pairing the slab pour with adjacent flatwork or a small sidewalk project, to improve efficiency. Optimal timing can yield savings: off-peak season bids or scheduling during dry periods often come with lower labor rates and truck availability.
Consider design adjustments that reduce complexity: simpler edge profiles, fewer control joints, and standard thickness options can lower both materials and labor. Where applicable, verify that permits align with the project scope to avoid change orders. Proper subgrade preparation reduces later repair costs and may lower long-term maintenance needs.
Regional Price Differences
Prices for a 60×80 slab vary by region due to labor and material markets. In the Northeast, expect higher labor costs and stricter permitting, while the Southeast may offer lower labor rates but higher weather-related constraints. The Midwest often balances moderate material costs with solid competition among contractors. Regional deltas can be around plus or minus 10–25 percent from a national baseline, depending on access and market density.
Labor & Installation Time
A typical pour for a 60×80 slab can take 1 to 3 days, depending on thickness, compaction needs, jointing pattern, and finishing complexity. A smaller crew may finish a 4 inch basic slab in a single shift, while reinforced or decorative finishes extend the timeline. Labor hours and rates directly shape the final price, with common ranges of 8–12 hours for prep and pour plus finishing time.
Real-World Pricing Examples
Scenario cards illustrate typical outcomes. Basic slab: 4 inch, no heavy reinforcement, standard finish; 8–12 hours, lower-end equipment, total around 22,000–28,000 dollars. Mid-Range slab: 5 inch with welded wire and moderate curing; 16–20 hours, total around 34,000–44,000 dollars. Premium slab: 6 inch with rebar, fiber, higher-end finish, additional drainage or barrier features; 24–32 hours, total around 50,000–70,000 dollars. These snapshots assume typical site conditions and do not include extraordinary excavation or soil remediation needs. Assumptions: region, specs, labor hours.