Apollo concrete coatings cost varies by coating type, surface condition, and project size. This guide outlines typical price ranges and major cost drivers, helping buyers estimate budgets and compare options. It covers both total project costs and per-unit pricing to support practical budgeting for U.S. buyers.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Coating System (materials) | $2.00 | $3.50 | $6.50 | Per sq ft; epoxy, urethane, or polyaspartic differences |
| Labor (installation) | $2.50 | $4.50 | $8.50 | Hours × hourly rate; crew size affects totals |
| Prep & Surface Repair | $1.50 | $3.00 | $7.00 | Crack repair, grinding, patching |
| Equipment & Consumables | $0.50 | $1.20 | $3.00 | Polish, grinders, rollers, rollers, solvents |
| Permits & Inspections | $0.00 | $0.50 | $2.00 | Depends on local rules |
| Warranty & Overhead | $0.40 | $0.90 | $2.50 | Company-provided coverage |
| Delivery/Disposal | $0.20 | $0.60 | $1.50 | Waste handling, empty containers |
Assumptions: region, specs, labor hours.
Overview Of Costs
Typical cost range for Apollo concrete coatings spans from about $3.00 to $8.00 per square foot, depending on system and prep needs. The range reflects material type, surface condition, and regional labor rates. For a 1,500-square-foot garage, total project costs commonly fall between $7,500 and $16,000, while professional-grade polyaspartic systems may push toward the upper end. Assumptions include standard interior application with dry, crack-free concrete and a dry-off period of 6–12 hours between coats.
Across projects, most buyers see two primary cost bands: (1) basic epoxy with minimal prep, and (2) advanced polyaspartic or multi-layer systems with extensive surface repair and moisture mitigation. Per-unit cost is useful for quick budgeting, while total project estimates capture prep, disposal, and downtime.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2.00 | $3.50 | $6.50 | Epoxy, urethane, or polyaspartic systems |
| Labor | $2.50 | $4.50 | $8.50 | Crew size and local wage rates |
| Prep & Repair | $1.50 | $3.00 | $7.00 | Includes crack filling and patching |
| Permits | $0.00 | $0.50 | $2.00 | Local permit requirements |
| Delivery/Disposal | $0.20 | $0.60 | $1.50 | Transport of materials and waste |
| Warranty/Overhead | $0.40 | $0.90 | $2.50 | Company support and admin costs |
Assumptions: interior garage or basement application, standard moisture profile.
What Drives Price
Coating chemistry and cure time are major price levers. Epoxy systems are typically cheaper upfront but may require more frequent maintenance, while polyaspartics offer faster cure and higher wear resistance at a premium. Substrate preparation dominates costs when surfaces show oil contamination, delamination, or cracking. The more square footage, the greater the impact of fixed prep and mobilization costs, pushing per-square-foot pricing downward on larger jobs.
Other drivers include color options, slip-resistance additives, and UV stability requirements. Projects with high humidity, poor ventilation, or unusual floor slopes may require longer installation windows or additional safety gear, adding to labor and equipment costs. Seasonal demand can also shift pricing, with off-peak periods sometimes offering tighter quotes.
Ways To Save
Maximize savings by bundling prep, coating, and warranty with a single contractor. Consider scheduling during off-peak months and obtaining multiple quotes to benchmark labor rates. Thin-film epoxy systems can reduce material costs, but verify that durability matches the intended use. For spaces with heavy traffic or chemical exposure, investing in a higher-grade system may lower long-term maintenance costs.
To further trim expenses, ask about partial resurfacing (retouching high-wear zones) instead of full-floor replacement, and request a written estimate that itemizes each cost driver. Ensure that your quote includes curing times and any required temporary space usage constraints to avoid hidden downtime costs.
Regional Price Differences
Prices vary by region due to labor markets and material supply chains. In the Northeast, epoxy systems with higher VOC compliance add modest premiums, while the Midwest may offer lower labor rates but higher travel fees for remote sites. The West Coast often sees higher material costs and longer lead times. For three regions—Urban, Suburban, and Rural—the typical deltas relative to national averages are roughly +8% to +15% in Urban areas, -5% to +5% in Suburban zones, and -10% to -20% in Rural locales. These ranges assume standard interior applications and no extreme environmental constraints.
Labor, Hours & Rates
Labor costs can form a disproportionate share of total pricing. Typical crew rates range from $40 to $90 per hour per skilled technician, with two-to-three-person teams common for residential floors. Installation hours scale with square footage and prep needs; a 1,000–2,000 sq ft job often requires 1–3 days of work, while larger commercial spaces may extend beyond a week. Include labor for surface testing, moisture mitigation, and final coating inspection in the estimate.
Real-World Pricing Examples
Concrete coating quotes illustrate practical budgets under varying scopes. Each card summarizes three scenarios with distinct parts lists, labor hours, and totals. All numbers assume interior concrete at standard height and normal ambient conditions.
- Basic: 1,200 sq ft, epoxy system, minimal prep. Materials $2.40/sq ft, labor $3.50/sq ft, prep $1.00/sq ft; total roughly $6,120-$7,560.
- Mid-Range: 1,800 sq ft, dual-coat epoxy plus UV topcoat, crack repair light. Materials $3.20/sq ft, labor $4.75/sq ft, prep $1.50/sq ft; total roughly $13,680-$17,100.
- Premium: 3,000 sq ft, polyaspartic system with extensive prep, moisture mitigation, warranty. Materials $5.50/sq ft, labor $6.50/sq ft, prep $2.50/sq ft; total roughly $35,000-$40,000.
Assumptions: region, specs, labor hours.